How and where to use guide
Premdor FD30 fire door. Paint Grade Premium, 1981 x 610 x 44mm.
Typical applications and locations
This door is ideal for internal fire safety applications in residential and light commercial buildings. Common uses include fire separation between hallways and living spaces, stairwell protection, and compartmentalisation of risk areas. The paint grade finish makes it particularly suitable for refurbishment projects and new builds where doors will be decorated to match surrounding joinery. Its practical design prioritises functionality over aesthetic pre-finishing, making it cost effective for volume installations.
- Internal hallways and circulation spaces requiring fire safety
- Stairwell enclosures and fire compartments
- Refurbishment projects where trimming to existing frames is necessary
- Locations where doors will be painted as part of wider decoration schemes
Installation and trimming
The door is supplied with exposed lippings on the two long edges, which facilitate straightforward installation into standard frames. The trimmable design allows on-site adjustment to suit existing openings, making it particularly valuable for refurbishment work where precise measurements may vary. Ensure the frame is square and level before hanging, and follow standard fire door installation practices to maintain FD30 certification. Always check local building regulations and fire safety requirements before installation.
- Check frame dimensions and square before installation
- Trim long edges as required using a fine-toothed saw
- Ensure proper frame support and level hanging
- Install fire rated hinges and hardware as specified for FD30 compliance
- Verify that seals and closers are fitted according to certification requirements
Finishing and maintenance
The unlacquered veneer faces require painting before use. Prepare surfaces by light sanding and filling any minor imperfections, then apply primer and finish coats suitable for internal timber doors. This unfinished state allows you to match existing colour schemes and decoration standards. Once painted and in service, maintain the door with routine cleaning and inspect seals and hardware regularly to ensure fire safety performance is not compromised.
- Sand surfaces lightly and fill any defects before priming
- Apply quality primer suitable for veneer surfaces
- Apply two finish coats of interior paint for durability
- Inspect fire seals and closers periodically
- Keep door and frame clean and free from obstructions
Important limitations and compliance
This door provides FD30 fire resistance only when installed with appropriate certified hardware, seals, and closers. It is an internal door and must not be used in external locations or where weather resistance is required. The paint grade veneer is not suitable for high moisture environments such as kitchens or bathrooms without additional protective measures. Always verify that installation meets current Building Regulations and fire safety standards for your specific application.
- FD30 rating applies only with certified hinges, seals and closers
- Internal use only; not suitable for external applications
- Not recommended for high moisture areas without additional protection
- Confirm compliance with Building Regulations before installation
- Check fire safety certification documentation for your specific project requirements