How and where to use guide

Ecotherm Rigid PIR Insulation 1200 x 2400 x 90mm is commonly used for thermal insulation upgrades. How and where to use: - Prepare the surface or surrounding assembly so the product sits correctly and performs as intended. - Install to manufacturer guidance and site standards relevant to the application area. - Check fit, alignment, and finishing details before final handover. - Inspect the completed work and record key checks for maintenance planning. Typical performance notes: - Lightweight board format for easier handling and installation - Suitable for new build, refurbishment and retrofit projects - BBA-backed product assurance for specification confidence - Low thermal conductivity supports improved energy efficiency - Use in wall, floor, or roof assemblies where continuous thermal layer is required. - Seal joints and perimeter gaps to reduce thermal bridging and air leakage. Site note: Always verify compliance with current regulations and project specification requirements.