How and where to use guide
Ovolo Primed Moisture Resistant MDF Profile 5.49 Mtr 18mm x 117mm
Typical applications
This profile is ideal for creating custom shelving systems, building partition walls, and adding decorative moulding details to interior spaces. The moisture-resistant primed finish makes it suitable for use in kitchens, bathrooms, and utility areas where humidity levels may be elevated. The smooth ovolo profile works well as a finishing edge for cabinet work, built-in storage solutions, and architectural detailing where a professional appearance is essential.
- Custom shelving and storage units
- Partition wall construction
- Decorative moulding and edge finishing
- Kitchen and bathroom cabinetry
- Built-in furniture and architectural details
Installation and fixing
The profile is compatible with standard adhesives and mechanical fasteners commonly used in construction. For shelving applications, ensure adequate support brackets are installed at appropriate centres to safely distribute load. When partitioning, fix the profile securely to wall and floor structures using appropriate fixings for your substrate. The primed finish allows for direct decoration with paint or stain once installed, though light sanding between coats is recommended for optimal adhesion.
- Use suitable adhesives and fasteners for your substrate type
- Install support brackets at centres appropriate to load requirements
- Secure firmly to structural elements in partition applications
- Sand lightly before applying final paint or stain finishes
- Allow adequate drying time for adhesives before loading shelves
Moisture resistance and maintenance
The moisture-resistant coating provides protection against humidity and minor water exposure, making this profile suitable for damp environments. However, it should not be used in areas of direct water contact or prolonged immersion. Regular dusting and occasional wiping with a damp cloth will maintain the finish. Avoid excessive moisture exposure and ensure adequate ventilation in enclosed spaces to prevent moisture accumulation.
- Suitable for humid environments but not for direct water contact
- Maintain with regular dusting and damp cloth cleaning
- Ensure good ventilation in kitchens and bathrooms
- Do not use in areas of prolonged water exposure
- Inspect periodically for signs of moisture damage or swelling
On-site handling and cutting
The 5.49 metre length should be stored flat and protected from moisture and direct sunlight before installation. When cutting to length, use a fine-toothed saw to minimise chipping of the primed surface. Measure twice before cutting to reduce waste. The 18mm thickness provides good structural integrity whilst remaining manageable for single-person handling on most applications. Seal any cut edges with primer or paint to maintain moisture protection.
- Store flat in a dry, protected location before use
- Use fine-toothed saws to minimise edge chipping
- Seal cut edges with primer to maintain moisture resistance
- Measure carefully to minimise waste on 5.49m lengths
- Wear appropriate PPE when cutting and handling