Fixing and buying guide
Deanta Rochester White Primed FD30 Fire Door 686mm x 1981mm x 45mm
Who this door is for
This fire door is for homeowners, landlords, and builders installing internal fire safety doors in residential properties. It suits anyone wanting a traditional aesthetic without compromising on modern fire performance. The white primed finish appeals to those planning to decorate to their own specification rather than accepting a pre-finished colour.
- Residential new builds and refurbishment projects
- Properties requiring FD30 fire-rated internal doors
- Customers preferring traditional panel styling
- Those planning to paint or stain the door themselves
Sizing and compatibility
This door measures 686mm wide by 1981mm tall by 45mm thick. These are standard UK internal door dimensions. The door can be trimmed by up to 30mm from both width and height if your opening is slightly smaller, allowing flexibility on site. Confirm your door frame opening size before purchase. The 45mm thickness is typical for internal doors and will fit standard UK door frames. Check that your frame is suitable for a solid core fire door, as these are heavier than hollow-core alternatives.
- Standard UK internal door size: 686mm x 1981mm
- Can be trimmed up to 30mm from width and height
- 45mm thickness for standard internal frames
- Solid core construction is heavier than hollow-core doors
What is included and pre-install checks
The door arrives white primed and ready for finishing. It does not include hinges, handles, locks, or frame – these must be purchased separately. Before installation, inspect the door for any damage in transit. Check that your frame is square, level, and plumb, and that the opening dimensions match the door size (allowing for trimming if needed). Ensure the frame is suitable for fire door installation and that you have the correct fire-rated hinges and seals for FD30 compliance. If trimming is required, use a fine-toothed saw and sand the cut edges before priming.
- Door only – hinges, handles, locks, and frame sold separately
- Inspect for transit damage before installation
- Verify frame is square, level, and plumb
- Confirm opening dimensions allow for door fit or trimming
- Use fire-rated hinges and seals to maintain FD30 certification
- Sand any cut edges and prime before finishing
Certification, warranty, and finishing
This door carries BM TRADA Q-Mark third-party certification for FD30 fire performance and is made from FSC-certified sustainable timber. Deanta backs the door with a 10-year manufacturer's warranty. The white primer finish is a base coat ready for your choice of paint, stain, or other decorative finish. Apply a suitable wood primer and undercoat before your final topcoat to ensure durability and a professional appearance.
- BM TRADA Q-Mark certified for FD30 fire safety
- FSC-certified sustainable timber
- 10-year manufacturer's warranty
- White primed – ready for paint or stain of your choice