Fixing and buying guide
PREMDOR Vertical 5 Panel Smooth FD30 FIRESHIELD 1981mm x 686mm x 44mm PEFC COMPLIANT
What this door is for
This is a fire-rated internal door suitable for properties where building regulations require fire safety measures between rooms or between a room and a hallway. The FD30 rating makes it appropriate for residential properties, care facilities, and commercial buildings. The smooth moulded panel finish with white base coat provides a quality appearance at an affordable price point, and the smooth faces are specifically designed to accept on-site painting for custom colour matching.
- FD30 fire-rated for 30 minutes fire resistance
- Traditional 5-panel vertical design
- Smooth moulded faces ready for painting
- White base coat applied
- PEFC compliant timber sourcing
Sizing and compatibility
This door is supplied at 1981mm height x 686mm width x 44mm thickness, which is a standard UK internal door size. Before purchasing, measure your existing doorway opening to confirm compatibility. The 686mm width is suitable for standard single doorways. The 44mm thickness is typical for internal doors and will fit standard UK door frames. You will need to check that your existing frame is compatible or budget for a new frame if required.
- Height: 1981mm
- Width: 686mm
- Thickness: 44mm
- Suitable for standard UK internal doorways
- Requires compatible frame and hardware
Preparation and finishing
The door arrives with a white base coat applied, providing a clean foundation for on-site painting. The smooth moulded faces are specifically engineered to accept paint finishes without additional sanding or preparation. You should plan to apply your chosen paint colour after installation. Ensure the door is stored flat and in dry conditions before fitting. Check that the door is not warped or damaged upon delivery before proceeding with installation.
- White base coat already applied
- Smooth faces ready for painting
- Store flat and keep dry before installation
- Inspect for damage before fitting
- Plan painting schedule after hanging
Installation and fire safety
To maintain the FD30 fire rating, this door must be installed correctly with appropriate fire-rated hardware including hinges, locks, and seals as specified by building regulations. The door should be hung in a compatible fire-rated frame with proper sealing around the frame edges. Do not drill or cut the door in ways that compromise the fire rating. Consult building control requirements for your specific application, as installation standards may vary. Professional fitting is recommended to ensure the fire rating is preserved.
- Requires fire-rated hinges and hardware
- Must be installed in compatible fire-rated frame
- Proper sealing around frame edges is essential
- Do not drill or cut in ways that compromise rating
- Professional installation recommended