How and where to use guide
PREMDOR Vertical 5 Panel Smooth FD30 FIRESHIELD 1981mm x 686mm x 44mm PEFC COMPLIANT
Typical applications and where to install
This FD30 fire-rated door is designed for internal use in buildings requiring fire safety compliance. It is commonly installed in commercial premises, multi-unit residential buildings, and any property where 30-minute fire resistance certification is mandatory. The door suits hallways, corridors, stairwells, and room partitions where fire compartmentalisation is necessary. Its traditional vertical five-panel design integrates well into both period and contemporary interiors. The 1981mm x 686mm x 44mm dimensions make it suitable for standard UK doorway openings; always verify your exact opening size before ordering.
- Commercial offices, hotels, and hospitality venues
- Multi-storey residential buildings and apartment blocks
- Healthcare facilities and care homes
- Educational establishments
- Any location requiring FD30 fire-rated internal doors
Installation and on-site finishing
The door arrives with a white base coat applied to its smooth moulded panel faces, ready for on-site painting. Hang the door using three quality hinges into a fire-rated frame (purchased separately) with appropriate fire seals and intumescent strips fitted to meet FD30 standards. The smooth faces accept paint readily; lightly sand if needed to key the surface, then apply two coats of quality interior paint for a professional finish. Ensure all gaps around the frame are properly sealed with fire-rated sealant to maintain the door's fire resistance rating. Do not cut, drill, or modify the door in ways that compromise its fire integrity.
- Fit into fire-rated frames with intumescent strips and seals
- Sand lightly before painting for optimal paint adhesion
- Apply two coats of quality interior paint
- Use fire-rated sealant around frame perimeter
- Do not cut or drill the door without professional advice
Performance and maintenance
This door meets FD30 fire safety standards, meaning it will resist fire penetration for 30 minutes under test conditions. The moulded panel construction provides excellent rigidity and durability in high-traffic areas. Once painted, maintain the door with standard interior door care: wipe clean with a damp cloth and touch up paint as needed. Check hinges and hardware periodically for wear. The PEFC-compliant construction confirms responsible timber sourcing. Do not expose the door to excessive moisture or direct external weather, as it is designed for internal use only.
- FD30 fire resistance rating when properly installed
- PEFC-compliant timber sourcing
- Durable moulded panel construction
- Maintain with damp cloth and touch-up paint as required
- Internal use only
Limitations and important considerations
This is an internal door only and must not be exposed to external weather or high-moisture environments such as bathrooms without additional protection. Fire rating is only valid when the door is installed in a fire-rated frame with all required seals and intumescent strips correctly fitted; installation must comply with Building Regulations and relevant fire safety standards. The door cannot be cut, notched, or significantly modified without invalidating its fire rating. Always consult your building control officer or fire safety professional before installation to confirm compliance with your specific project requirements.
- Internal use only; not suitable for external or wet areas
- Fire rating depends on correct frame installation and sealing
- Do not modify the door structure
- Verify compliance with local Building Regulations
- Confirm FD30 certification requirements with your local authority