How and where to use guide
PREMDOR Vertical 5 Panel Smooth FD30 FIRESHIELD 2032mm x 813mm x 44mm PEFC COMPLIANT
Typical applications and installation
This FD30 fire door is designed for internal use in buildings where fire compartmentalisation is required by Building Regulations. Common applications include office buildings, care facilities, multi-residential properties, and commercial spaces where corridors and circulation areas need fire protection. The door measures 2032mm x 813mm, making it suitable for standard UK doorway openings. Installation should follow FD30 fire door specification requirements: use fire-rated hinges, fire-rated locks, and appropriate door frames rated to the same standard. Ensure the door is hung plumb and level, with consistent gaps around the frame (typically 2-4mm) to allow for thermal expansion and proper sealing. All gaps must be sealed with intumescent strips or fire-rated sealant to maintain the fire rating.
- Install in corridors, circulation spaces, and areas requiring 30-minute fire resistance
- Use only fire-rated hinges, locks, and frame components to maintain FD30 certification
- Ensure proper sealing of all gaps with intumescent strips or fire-rated sealant
- Hang door plumb and level with consistent gaps around the frame
- Do not cut, drill, or modify the door in ways that compromise fire integrity
On-site finishing and painting
The white base coat provides an ideal foundation for on-site painting. The smooth moulded faces accept paint readily, allowing you to achieve a high-quality finish that matches your interior specification. Before painting, inspect the door surface for any dust or debris and wipe clean with a damp cloth. Allow to dry fully. Use a quality interior paint suitable for timber-faced doors; a primer may be applied if required, though the white base coat often provides adequate coverage for most paint systems. Apply paint in thin, even coats following the manufacturer's instructions, paying particular attention to the panel details and edges. Allow adequate drying time between coats.
- Clean the white base coat surface with a damp cloth before painting
- Apply quality interior paint in thin, even coats
- Pay attention to panel details and moulded edges for even coverage
- Allow full drying time between coats as per paint manufacturer's guidance
- Avoid heavy paint build-up which may affect door operation
Fire safety and maintenance
The FD30 FIRESHIELD rating is contingent on correct installation and maintenance. Never remove or damage intumescent strips, fire-rated seals, or hardware. Do not paint over intumescent strips or fire-rated components, as this compromises their function. Regularly inspect the door for signs of damage, warping, or seal deterioration. In the event of damage, contact the door manufacturer or supplier for repair or replacement advice. The door should not be cut, drilled, or modified on site in ways that breach the fire rating. Keep the door and frame clean and free from obstruction to ensure it closes properly and seals effectively.
- Never remove or damage intumescent strips or fire-rated seals
- Do not cut or drill the door without consulting the manufacturer
- Inspect regularly for warping, damage, or seal deterioration
- Keep the door and frame clean and free from obstruction
- Ensure the door closes fully and latches securely at all times
Product specification and limitations
This door is PEFC compliant, confirming responsible timber sourcing. The 44mm thickness and moulded panel construction provide structural integrity and acoustic performance alongside fire resistance. The vertical five-panel design offers traditional aesthetics suitable for period and contemporary interiors. The smooth faces are designed for painting; they are not suitable for staining or natural wood finishes. The door is for internal use only and should not be exposed to external weather or high-moisture environments such as bathrooms or kitchens without additional protective measures. Ensure the door is stored flat and protected from moisture and temperature extremes before installation.
- FD30 fire rating applies only when installed with fire-rated components and proper sealing
- Suitable for internal use only; not for external or high-moisture applications
- Smooth faces are designed for painting, not staining or natural finishes
- Store flat and protected from moisture and temperature extremes before installation
- PEFC compliant timber sourcing