Fixing and buying guide
LPD White DX 30S Style 1981 x 686 x 44mm (27")
What you're buying
This is a complete internal door leaf manufactured from solid engineered timber with a white primer finish. The 30s style panel design features one large square panel positioned above three smaller rectangular panels, creating a classic aesthetic. The door is supplied as a single leaf only and does not include hinges, handles, or frame components.
- Solid engineered core construction for strength and stability
- White primed finish ready for decoration
- 1981 x 686 x 44mm dimensions (27 inch width)
- Manufactured using environmentally friendly timber
- Suitable for internal use only
Compatibility and sizing
This door is designed as a standard internal door leaf and will fit most conventional internal door frames. The 686mm width (27 inches) is a typical internal door size. Importantly, this door can be trimmed on site, allowing you to adjust the width and height to suit your specific opening. However, you should measure your door frame opening carefully before purchase to ensure the door can be trimmed to fit without excessive material removal.
- Standard internal door size compatible with most frames
- Can be trimmed to fit your opening
- Requires separate hinges and handle hardware
- Requires separate frame if not already installed
Preparation and finishing
The door arrives primed in white, which means the base coat is already applied. Before hanging, you should plan your final decoration. The primed surface is ready to accept paint, stain, or other finishes. Inspect the door for any damage during delivery and allow it to acclimatize to your home's humidity for 48 hours before installation. Check that your frame is square and level before hanging.
- Primed finish requires a top coat of paint or stain
- Allow 48 hours acclimatization before installation
- Inspect for transit damage on delivery
- Ensure door frame is square and level before hanging
Pre-installation checks
Before you begin installation, verify that your door opening dimensions will accommodate this door with trimming if necessary. Check that you have appropriate hinges and a handle for internal use. Confirm that your frame is properly installed and square. If you are trimming the door, ensure you have the correct tools and plan your cuts carefully to maintain the panel design proportions.
- Measure your opening to confirm fit
- Source hinges and handle separately
- Verify frame is square and plumb
- Plan any trimming carefully to preserve panel aesthetics