Fixing and buying guide
LPD White DX 30S Style 1981 x 762 x 35mm (30")
What you're buying
This is a pre-hung internal door leaf measuring 1981mm in height, 762mm in width, and 35mm in thickness. The door comes primed in white with a solid engineered core construction, which provides superior strength compared to hollow-core alternatives. The classic 1930s styling with its panel configuration suits period properties and contemporary interiors seeking traditional character.
- Solid engineered core for strength and durability
- Primed white finish ready for final decoration
- 1930s style with three lower rectangular panels and one upper square panel
- Manufactured using environmentally friendly timber
- Internal use only
Sizing and compatibility
At 762mm wide and 1981mm tall, this door is a standard 30-inch width suitable for most internal doorways. The 35mm thickness is typical for internal doors and will work with standard door frames and hardware. Before purchasing, measure your existing doorway opening to confirm compatibility. The door can be trimmed during installation if minor adjustments are needed to fit your specific opening, offering flexibility for non-standard dimensions.
- Width: 762mm (30 inches)
- Height: 1981mm
- Thickness: 35mm
- Trimmable for installation flexibility
- Confirm your doorway opening measurements before ordering
Preparation and finishing
The door arrives primed and ready for decoration. Before installation, inspect the door for any damage in transit and allow it to acclimatise to your home's humidity for 48 hours if possible. Once fitted, apply your chosen top coat of paint or stain to the primed surface. Ensure all edges and the back face are also sealed with paint or finish to protect the engineered core from moisture absorption.
- Door arrives primed white, ready for final paint or stain
- Allow acclimatisation time before installation
- Paint all surfaces including edges and back face for protection
- Use quality interior paint or stain suitable for primed timber
Installation checklist
Ensure your door frame is square, level, and the correct size before fitting. You will need standard door hardware including hinges, a handle, and a latch mechanism compatible with 35mm thickness doors. The trimmable design means you can adjust the width or height slightly if your opening is not perfectly standard, but significant alterations should be avoided. Fit the door carefully to avoid damage to the primed finish during installation.
- Check door frame is square and level
- Confirm frame opening matches door dimensions
- Arrange hinges, handle, and latch hardware in advance
- Use care during fitting to protect the primed finish
- Trim only if minor adjustments are needed