Fixing and buying guide
LPD White DX 30S Style 1981 x 762 x 44mm (30")
What you are buying
This is a complete internal door leaf measuring 1981mm in height by 762mm in width by 44mm in depth. The door features a primed white finish with a solid engineered core construction, which provides added strength compared to hollow-core alternatives. The classic 1930s styling comprises three rectangular inset panels positioned below one larger square panel, creating an attractive period-inspired look suitable for period properties or traditional interior schemes.
- Solid engineered core for strength and durability
- Primed white finish ready for final decoration
- 30-inch (762mm) width suitable for standard internal openings
- 1981mm height fits standard UK ceiling heights
- 44mm thickness provides structural rigidity
- Manufactured using environmentally friendly timber
Compatibility and sizing
This door is designed for internal use within standard UK properties. The 762mm width corresponds to a 30-inch door, which is the most common size for internal doorways. The 1981mm height accommodates standard UK ceiling heights. Before purchase, measure your existing door frame opening to confirm compatibility. The door can be trimmed during installation, allowing adjustment to fit slight variations in frame dimensions, though significant trimming should be avoided to maintain structural integrity.
- Internal use only
- Standard 30-inch width for typical UK door frames
- Trimmable for installation flexibility
- Confirm frame opening dimensions before ordering
Preparation and installation
The door arrives primed and ready for decoration. Before hanging, inspect the door for any damage in transit and allow it to acclimatise to the room environment for 24 to 48 hours. You will need to apply a final top coat of paint or stain to achieve your desired finish. Ensure your door frame is square, level, and in good condition before installation. Trimming should be carried out carefully using appropriate tools; trim from the bottom or sides as needed, but avoid excessive removal that could compromise the door's structural integrity.
- Allow 24 to 48 hours acclimatisation before hanging
- Apply final paint or stain coat after installation
- Check door frame is square and level
- Trim carefully if required to fit frame opening
- Use appropriate tools and techniques for trimming
Pre-installation checks
Verify that your door frame opening matches the door dimensions and that the frame is structurally sound. Check that hinges, handles, and latch hardware are available and compatible with a 44mm thick door. Ensure the floor is level to prevent binding or gaps. Confirm that the primed finish is acceptable as your base coat and plan your final decoration accordingly.
- Measure door frame opening height, width, and depth
- Confirm frame is square, level, and not warped
- Check hardware compatibility with 44mm door thickness
- Ensure floor is level
- Plan final paint or stain finish