How and where to use guide
PREMDOR 4 PANEL SMOOTH FD30 FIRESHIELD 686MM X 1981MM X 44MM PEFC COMPLIANT
Typical applications and installation
This FD30 fire-rated door is designed for internal use in residential and commercial buildings where fire safety regulations require 30-minute fire resistance. Common applications include stairwell doors, corridor separations, and compartmentalisation within multi-unit dwellings. The door measures 686mm x 1981mm x 44mm and should be hung in a suitable fire-rated frame with appropriate hinges and hardware certified for FD30 use. Ensure the frame, seals, and all ironmongery comply with fire safety standards and are installed according to manufacturer specifications. The door must be hung plumb and level, with even gaps around the perimeter for proper operation and fire performance.
- Install in fire-rated frames with intumescent seals and cold smoke seals where required
- Use fire-rated hinges and hardware appropriate for FD30 doors
- Ensure gaps around the door are consistent and within specification
- Do not cut, drill, or modify the door in ways that compromise fire integrity
- Fit self-closing devices where required by building regulations
On-site finishing and painting
The door arrives with a white base coat applied to the smooth moulded panel facings, providing an ideal foundation for on-site decoration. The smooth faces are specifically designed to accept paint finishes without requiring extensive surface preparation. Before painting, inspect the door for any damage sustained during delivery or handling. Light sanding may be beneficial to key the surface if required, though the smooth finish typically accepts paint directly. Apply primer if changing from white to darker colours, then apply your chosen topcoat according to paint manufacturer instructions. Ensure adequate ventilation during drying and allow sufficient cure time before hanging.
- Check the white base coat for damage before painting
- Use quality interior paint suitable for moulded panel doors
- Apply primer when using darker colours over the white base
- Allow adequate drying time between coats
- Avoid painting over any fire safety labels or certification marks
Performance and limitations
This door provides 30-minute fire resistance when installed correctly with appropriate fire-rated components and seals. The moulded panel construction offers a traditional appearance with excellent durability and performance. However, the fire rating is only maintained when the door is installed as a complete system with certified frame, seals, and hardware. The door is for internal use only and should not be exposed to external weather conditions. Do not use this door in wet areas such as bathrooms or kitchens where moisture exposure could affect performance. The smooth faces provide an excellent finish for painting but should be protected from impact damage on-site.
- FD30 rating applies only when installed with certified fire-rated components
- For internal use only; not suitable for external applications
- Avoid prolonged moisture exposure
- Protect from impact damage during storage and installation
- PEFC compliant timber sourcing
On-site storage and handling
Store the door flat or in an upright position in a dry, well-ventilated area protected from weather and excessive temperature fluctuations. Avoid stacking multiple doors without adequate support to prevent warping or damage to the smooth panel facings. Handle with care to prevent impact damage to edges and corners, which could compromise both appearance and fire performance. Keep the door away from damp conditions and direct heat sources during storage. Transport the door carefully to site, ensuring it is adequately supported and protected during transit to prevent damage to the white base coat finish.
- Store in a dry, protected environment
- Keep away from damp and extreme temperature changes
- Handle carefully to avoid damage to smooth faces and edges
- Do not stack without proper support
- Protect during transport to prevent damage to finish