How and where to use guide
PREMDOR 4 PANEL SMOOTH FD30 FIRESHIELD 610MM X 1981MM X 44MM PEFC COMPLIANT
Typical applications and locations
This FD30 fire-rated door is designed for internal use in buildings where fire safety regulations require fire compartmentalisation between spaces. Common applications include residential apartment blocks, care facilities, hotels, and commercial buildings where doors must resist fire for 30 minutes. The door is suitable for standard doorways measuring 610mm width by 1981mm height. Its traditional four-panel design with smooth moulded facings makes it appropriate for both contemporary and period-style interiors.
- Apartment blocks and multi-residential buildings requiring fire compartmentalisation
- Commercial and office buildings with fire safety requirements
- Care facilities and hospitality venues
- Refurbishment projects where traditional door aesthetics are preferred
- Any internal location where FD30 fire rating is specified in building regulations
Installation and on-site finishing
The door arrives with a white base coat applied to its smooth moulded panel faces, ready for on-site painting. Hang the door using three quality hinges appropriate for the door weight, ensuring proper alignment and clearance. The smooth face finish allows for high-quality paint application without extensive surface preparation. Apply primer if required by your chosen paint system, then finish with two coats of quality interior paint to achieve your desired colour and specification. Ensure the door is fully cured before bringing into service.
- Hang using three quality hinges with appropriate load rating
- Check door alignment and clearance before final fixing
- Paint using standard interior paint systems over the white base coat
- Allow adequate drying time between coats and before use
- Ensure fire seals and intumescent strips are correctly fitted around the frame
Fire safety and performance
This door carries FD30 fire rating, meaning it will resist the passage of flames and hot gases for 30 minutes when tested to relevant fire safety standards. To maintain its fire performance, the door must be installed with appropriate fire-rated frames, door seals, and intumescent strips as specified in building regulations. Do not drill additional holes or make modifications that compromise the fire integrity of the door construction. Ensure all fire safety components are correctly installed and maintained throughout the life of the door.
- FD30 rating requires proper installation with fire-rated frames and seals
- Do not drill holes or modify the door in ways that breach fire integrity
- Intumescent strips must be fitted to all edges where the door meets the frame
- Ensure self-closing mechanisms are installed and maintained if required
- Inspect regularly to confirm seals and components remain in good condition
Maintenance and care
The smooth moulded panel faces are easy to clean and maintain with standard household cleaning methods. Wipe down with a damp cloth and mild detergent as needed. The painted finish should be inspected periodically for any damage or wear, particularly around high-traffic areas and door handles. Minor scuffs can be touched up with matching paint. The door is PEFC compliant, confirming responsible forestry sourcing. Avoid exposure to excessive moisture or direct external weather, as this is an internal door only.
- Clean smooth faces with damp cloth and mild detergent
- Touch up paint damage promptly to prevent moisture ingress
- Check fire seals and intumescent strips remain intact
- Keep the door dry and do not expose to external weather
- Ensure hinges and closing mechanisms operate smoothly