How and where to use guide

PREMDOR 6 PANEL MOULDED SMOOTH FD30 FIRESHIELD 686MM X 1981MM X 44MM

Typical applications and where to install

This FD30 fire-rated door is suitable for internal locations where fire safety regulations require a half-hour fire resistance rating. Common applications include hallways, landings, circulation spaces, and compartment walls in multi-storey residential properties, care facilities, and commercial buildings. The traditional six-panel moulded appearance makes it particularly suitable for period properties or schemes requiring a classic aesthetic. Install vertically in standard timber or metal door frames with appropriate fire-rated ironmongery and seals to maintain the FD30 rating. Ensure the door leaf is hung plumb and level, and that all gaps around the frame are properly sealed with fire-rated materials as per building regulations.

Internal circulation areas and hallways in residential and commercial properties
Fire compartment walls and escape route doors requiring FD30 compliance
Period properties and traditional interior schemes
On-site painted finishes to match existing décor

Installation and on-site finishing

The door arrives with a white base coat applied to both smooth faces, ready for on-site painting. Before installation, inspect the door for any transport damage and allow it to acclimatise to the building environment for 48 hours. Hang the door using three quality hinges positioned at 150mm from top and bottom, with the third hinge centred. Ensure the frame is square and plumb before hanging. The smooth moulded faces accept paint readily; lightly sand the base coat with fine abrasive paper, fill any minor imperfections with suitable filler, and apply your chosen finish paint system. Maintain the fire rating by using only approved fire-rated seals and ironmongery, and ensure all gaps between frame and wall are sealed with fire-rated materials.

Allow 48 hours acclimatisation after delivery before hanging
Use three quality hinges with appropriate fire-rated specification
Lightly sand white base coat before painting for optimal finish
Seal all frame gaps with fire-rated materials to maintain FD30 rating
Install fire-rated door seals and ironmongery only

Performance and maintenance

The 44mm thickness and solid moulded construction provide good acoustic and thermal performance alongside fire resistance. The smooth faces are durable and easy to clean with standard household products. The white base coat provides a neutral foundation for any paint colour or finish system. To maintain performance and appearance, keep the door clean and dry, avoid excessive moisture exposure, and inspect seals and ironmongery periodically. The moulded panel design is inherently stable and resistant to warping. Do not sand through the base coat into the substrate, as this may compromise the fire rating. For repairs or repainting, use compatible paint systems and maintain all fire-rated seals.

Solid 44mm construction provides durability and stability
Smooth faces are easy to clean and maintain
White base coat accepts all standard paint systems
Inspect fire-rated seals and hinges regularly
Do not compromise fire rating by removing or altering seals

Limitations and important considerations

The FD30 rating is only maintained when the door is installed with approved fire-rated frame, seals, hinges, and closers as specified in building regulations. The door must be hung vertically and cannot be cut or modified without invalidating the fire rating. It is not suitable for external use or areas subject to high moisture. The smooth moulded faces, whilst durable, are not impact-resistant and may show damage in heavy-traffic commercial environments. Ensure adequate ventilation during and after painting to allow proper drying and curing of finish coats. The door dimensions are 686mm x 1981mm x 44mm; verify these suit your opening before ordering, as the door cannot be trimmed without affecting fire performance.

FD30 rating requires approved fire-rated installation components
Door cannot be cut or modified without invalidating fire rating
Not suitable for external or high-moisture locations
Smooth faces may show impact damage in heavy-traffic areas
Ensure adequate ventilation during painting and drying