Fixing and buying guide
2040X726X44MM OAK DX 30s STYLE FD30 Door
What this door is and who it's for
This is an internal fire-rated door suitable for properties requiring FD30 compliance, particularly those with period or traditional interiors. The 1930s style design with its distinctive panel configuration makes it ideal for character properties, period renovations, and homes where authentic detailing matters. The solid engineered core provides stability and durability while the unfinished white oak allows you to stain or finish it to match your décor.
- 30-minute fire rating (FD30) for compliance with building regulations
- Unfinished white oak construction allows custom finishing
- Solid engineered core for strength and stability
- 1930s style with three rectangular panels and one square panel
Sizing and compatibility
This door measures 2040mm in height by 726mm in width by 44mm in thickness. The 726mm width is a standard internal door size, suitable for typical domestic doorways. Verify your existing door opening dimensions before purchase to ensure proper fit. The 44mm thickness is standard for internal doors and will work with most standard door frames and hinges.
- Height: 2040mm (standard for internal doors)
- Width: 726mm (standard internal door width)
- Thickness: 44mm (compatible with standard frames and hardware)
- Check your opening dimensions carefully before ordering
What's included and pre-installation checks
The door is supplied unfinished, meaning you will need to apply your chosen stain, paint, or seal before or after hanging. Inspect the door upon delivery for any damage to the oak panels or edges. Check that your frame is square and plumb, and that the opening dimensions match the door size. You will need to source hinges, handles, and any fire-rated hardware separately if not already fitted.
- Door supplied unfinished – plan finishing work before or after installation
- Inspect for transit damage on delivery
- Confirm frame is square and opening matches 726mm width
- Source hinges, handles, and fire-rated hardware separately
Fire rating and installation
The FD30 rating means this door will resist fire for 30 minutes when properly installed. To maintain this rating, ensure the door is hung using appropriate fire-rated hinges and that any gaps around the frame are sealed correctly. Do not drill additional holes or make modifications that could compromise the fire rating. If you are unsure about fire-rated installation requirements, consult your building control officer or a qualified installer.
- FD30 rating requires proper installation to remain valid
- Use fire-rated hinges and appropriate sealing methods
- Avoid unauthorised drilling or modifications
- Seek professional advice if uncertain about fire safety requirements