How and where to use guide
PREMDOR 4 PANEL SMOOTH FD30 FIRESHIELD 711MM X 1981MM X 44MM PEFC COMPLIANT
Typical applications and installation
This door is suitable for internal use in properties where fire safety is a building regulation requirement. Common applications include hallways, landings, stairwells, and doors leading to escape routes. The FD30 rating makes it compliant for use in residential properties and commercial buildings where fire compartmentation is necessary. Installation follows standard internal door hanging procedures using the door frame and hardware of your choice. Ensure the door is hung plumb and level, and that all gaps around the frame are properly sealed to maintain fire performance. The door dimensions of 711mm x 1981mm suit standard UK doorway openings.
- Fire-rated for 30 minutes FD30 performance
- Suitable for escape routes and compartmentation
- Traditional 4-panel moulded design
- Standard UK door size 711mm x 1981mm
- 44mm thickness provides structural integrity
On-site finishing and painting
The smooth moulded faces and white base coat provide an excellent foundation for on-site decoration. The door arrives ready for painting, allowing you to match it to your interior colour scheme and finish requirements. The smooth surface finish ensures professional results with minimal preparation needed before applying your chosen paint system. Use quality interior paint suitable for timber or MDF-faced doors, and follow the paint manufacturer's instructions for application and drying times. Multiple coats may be required for full coverage and durability, particularly if painting over the white base coat with darker colours.
- White base coat ready for on-site painting
- Smooth faces minimise paint preparation
- Suitable for interior paint systems
- Allow adequate drying time between coats
- Sand lightly between coats for best finish
Maintenance and care
Once painted and installed, maintain the door through regular cleaning with a soft, damp cloth to remove dust and marks. Avoid excessive moisture exposure, as this can affect the door's performance and finish. Check periodically that the door closes properly and that the frame remains in good condition. The PEFC compliant construction ensures the door is sourced from responsibly managed forests. Do not sand or alter the door structure, as this may compromise its fire-rated performance. If damage occurs, repair using appropriate wood filler and paint rather than attempting structural modifications.
- Clean regularly with a soft, damp cloth
- Avoid prolonged moisture exposure
- Check door closure and frame condition periodically
- Do not sand or structurally alter the door
- Use wood filler for minor surface damage
Safety and performance limitations
The FD30 Fireshield rating is valid only when the door is properly installed, hung level, and all gaps around the frame are sealed according to building regulations. The fire performance depends on correct installation and maintenance of the complete door assembly, including frame and seals. This door is for internal use only and should not be exposed to external weather conditions. Do not use this door in wet areas such as bathrooms without appropriate protective measures. The door must be hung on suitable hinges and with appropriate locking hardware to ensure safe operation and maintain its fire-rated integrity.
- FD30 rating requires proper installation and frame sealing
- Internal use only, not suitable for external exposure
- Avoid prolonged moisture or wet environments
- Use appropriate hinges and hardware for safe hanging
- Maintain door closure and frame integrity for fire performance