Fixing and buying guide

What this door is and who it suits

This is a pre-hung internal door with moulded panel facings featuring a textured finish. The white base coat provides a primer surface ready for your final paint colour. It suits homeowners, builders, and contractors seeking a traditional four-panel aesthetic without the expense of solid timber doors. The standard core construction offers good value whilst maintaining structural integrity for typical domestic use.

Sizing and compatibility

This door measures 610mm wide by 1981mm tall by 35mm thick, making it suitable for standard UK internal doorways. Before purchase, measure your existing door opening or frame to confirm compatibility. Allow for frame thickness and any adjustments needed during installation. Check that your hinges and latch hardware are compatible with 35mm thickness doors, and verify that your door frame is square and plumb to ensure proper hanging and operation.

What you receive and pre-installation checks

• One moulded panel door with white base coat applied
• Textured faces ready for painting to your chosen colour
• Standard core construction
• Inspect the door upon delivery for any transit damage, dents, or surface defects
• Check that the door is not warped by laying it flat on a level surface
• Ensure your frame is the correct size and condition before hanging
• Confirm hinges and latch hardware are suitable for 35mm thickness

Preparation and finishing

The door arrives with a white base coat, which serves as primer. Sand the textured surface lightly with fine-grit sandpaper to key the surface and remove any dust or debris before painting. Apply your chosen topcoat colour following paint manufacturer instructions. The textured moulded faces will accept standard interior paint finishes. Allow adequate drying time between coats and ensure good ventilation during application. No additional priming is required due to the factory-applied white base coat.