Fixing and buying guide
PREMDOR 4 PANEL MOULDED TEXTURED STANDARD CORE 686MM X 1981MM X 35MM
What this door is for
This is an internal door designed for residential and commercial interior spaces where a traditional panelled aesthetic is desired. The textured moulded facings provide visual interest and depth, while the white base coat allows you to paint the door to your chosen colour scheme on site. It is suitable for general interior applications including bedrooms, living areas, hallways, and office spaces.
- Internal door applications only
- Traditional four-panel design
- Pre-primed white base coat for on-site painting
- Textured moulded facings for enhanced appearance
Sizing and compatibility
This door measures 686mm in width by 1981mm in height with a 35mm thickness. These are standard UK internal door dimensions. Before purchase, measure your existing door opening or frame to confirm compatibility. The door is designed to fit standard internal door frames and openings. Check that your frame is square and plumb, and verify that the opening width and height accommodate this door size with appropriate clearances for hanging and operation.
- Width: 686mm (standard 27 inch equivalent)
- Height: 1981mm (standard 78 inch equivalent)
- Thickness: 35mm standard core
- Suitable for standard UK internal frames
Pre-installation checks
Inspect the door upon delivery for any damage to the moulded facings or edges. Store the door flat in a dry environment before installation to prevent warping. Check that your existing frame is in good condition and that the opening dimensions are accurate. Ensure the frame is square by measuring diagonals—they should be equal. The door arrives with a white base coat, so no priming is required, but you will need to paint it with suitable interior paint once hung.
- Inspect for damage to textured facings and panel edges
- Store flat and dry before installation
- Verify frame is square and opening dimensions are correct
- Confirm frame is in sound condition and ready to receive the door
Finishing and painting
The door comes pre-coated with a white base coat, which provides a stable foundation for on-site painting. This allows you to finish the door to your chosen colour and specification after installation. Use a suitable interior paint system and follow the paint manufacturer's instructions for application. The textured moulded surface will take paint well, enhancing the traditional panel detail.
- White base coat applied—ready for painting
- Use quality interior paint for best results
- Textured surface enhances paint finish and detail
- Paint after hanging to avoid damage during installation