How and where to use guide
PREMDOR 4 PANEL MOULDED TEXTURED STANDARD CORE 686MM X 1981MM X 35MM
Typical applications and installation
This door is designed for internal use in domestic properties and light commercial settings such as offices and retail spaces. The 686mm width and 1981mm height make it suitable for standard UK doorway openings. Installation follows conventional internal door hanging practices: the door should be hung using three hinges into a prepared frame with appropriate clearances for operation and decoration. Ensure the frame is square and plumb before hanging to prevent binding or sticking. The door can be fitted with standard internal hardware including handles, locks, and hinges suitable for internal applications.
- Internal doorways in homes, flats, and commercial interiors
- Suitable for standard UK door frame openings
- Requires conventional hanging and frame preparation
- Compatible with standard internal door furniture and hardware
On-site finishing and painting
The white base coat provides an excellent foundation for on-site decoration. The textured moulded faces are specifically designed to accept paint finishes, allowing you to match the door to your interior colour scheme after installation. Preparation is straightforward: lightly sand the surface if required to remove any dust or debris, then apply your chosen paint system. The textured surface will enhance the visual depth of the moulded panels once painted, creating a quality finished appearance. Multiple coats may be required depending on your chosen paint colour and type.
- White base coat ready for painting with standard interior paints
- Textured faces designed for easy paint application
- Light sanding recommended before painting
- Allows on-site colour customisation to match décor schemes
Maintenance and care
Once painted and installed, maintain the door through regular cleaning with a soft cloth and mild detergent solution. Avoid excessive moisture exposure in areas such as kitchens or bathrooms where condensation may occur, as the standard core is not designed for high-moisture environments. Check hinges and hardware periodically to ensure they remain tight and functioning smoothly. Touch up paint as needed to maintain appearance and protect the surface from wear.
- Clean with soft cloth and mild detergent
- Not suitable for high-moisture areas such as bathrooms or kitchens
- Periodically check hinges and hardware for tightness
- Touch up paint as required to maintain finish
Limitations and considerations
The standard core construction is designed for internal use only and should not be exposed to external weather conditions or high-moisture environments. This door is not fire-rated and should not be used where fire safety doors are required by building regulations. The 35mm thickness is standard for internal doors and provides adequate performance for typical domestic and light commercial applications. Ensure the door frame and surrounding structure are adequately prepared before installation to achieve optimal performance and appearance.
- Internal use only; not suitable for external applications
- Not fire-rated; check building regulations for fire safety requirements
- Standard core unsuitable for high-moisture or wet areas
- Requires proper frame preparation for best results