Fixing and buying guide
PREMDOR 4 PANEL TEXTURED FD30 FIRESHIELD 610MM X 1981MM X 44MM
What this door is and who it's for
This is a pre-finished internal door leaf with a traditional four-panel moulded design. The FD30 Fireshield rating means it provides 30 minutes of fire resistance, meeting Building Regulations requirements for certain internal locations such as escape routes and communal areas. The textured face finish and white base coat allow you to paint it on-site to match your colour scheme, giving you flexibility without compromising on fire performance. It's suitable for trade installers, builders, and serious DIY customers working on residential or commercial projects.
- FD30 fire-rated internal door leaf
- Four-panel traditional moulded design
- White base coat ready for on-site painting
- Textured faces for quality finish appearance
Sizing and compatibility
This door is manufactured to 610mm width and 1981mm height with a 44mm thickness. These are standard UK internal door dimensions. Before ordering, confirm that your door opening accommodates this size and that your existing frame is compatible. The 44mm thickness is typical for internal doors and will fit standard UK door frames. Check your frame width and height measurements against these specifications to ensure proper fit.
- Width: 610mm
- Height: 1981mm
- Thickness: 44mm
- Verify your frame opening matches these dimensions
Preparation and on-site finishing
The door arrives with a white base coat applied, which provides a neutral foundation for your chosen finish colour. The textured face surfaces are designed to accept paint well. Before painting, inspect the door for any transport damage and allow it to acclimatise to the building environment for 48 hours. Sand lightly if needed to key the surface, then apply your chosen paint system following the paint manufacturer's instructions. Ensure adequate ventilation during drying.
- White base coat pre-applied
- Allow 48-hour acclimatisation before painting
- Light sanding may improve paint adhesion
- Apply paint following manufacturer's guidance
Pre-installation checks
Inspect the door on delivery for any damage to the moulded panels or edges. Check that your frame is square, level, and plumb before hanging. Ensure the frame width and height match the 610mm x 1981mm door dimensions, allowing for standard hinges and latch hardware. Confirm that FD30 fire rating certification is required for your installation location and that this door meets your Building Regulations compliance needs. Have appropriate hinges and latch furniture ready before installation begins.
- Check door for transport damage on delivery
- Verify frame is square, level, and plumb
- Confirm frame dimensions suit 610mm x 1981mm door
- Ensure FD30 rating meets your Building Regulations requirements