Fixing and buying guide
PREMDOR 6 PANEL MOULDED SMOOTH STANDARD CORE 610MM X 1981MM X 35MM
What this door is and who it suits
This is a pre-finished internal door with a classic six-panel moulded design. The white base coat provides a clean starting point for painting to your chosen colour on site. It is suitable for trade professionals and experienced DIY customers installing internal doors in residential properties. The smooth moulded faces deliver a high-quality appearance and feel, making it appropriate for visible areas where finish quality matters.
- Traditional six-panel styling with moulded faces
- White base coat applied at manufacture
- Smooth face finish for professional results
- Standard core construction
- Ready for on-site painting
Size and pack contents
The door measures 610mm wide by 1981mm tall by 35mm thick. This is a single door supplied as one unit. You will receive the door itself; you will need to source hinges, handles, and any additional hardware separately according to your installation requirements.
- Width: 610mm
- Height: 1981mm
- Thickness: 35mm
- Single door per pack
Compatibility and installation checks
Before purchase, confirm that your door opening accommodates the 610mm width and 1981mm height. Check that your frame is square and plumb, as out-of-square openings will cause fitting problems. Verify that you have suitable hinges rated for a 35mm thick door and that your chosen handle hardware is compatible with internal doors. Ensure the opening depth allows for frame thickness and any architrave you plan to fit.
- Measure your opening width and height before ordering
- Check frame is square and plumb
- Confirm hinge and handle compatibility
- Verify opening depth for frame and architrave
Preparation and finishing
The door arrives white base coated, which provides a primer-like foundation. Sand the surface lightly with fine abrasive before applying your chosen topcoat paint to ensure good adhesion and a smooth final finish. The smooth moulded faces are designed to accept paint well, so standard interior emulsion or eggshell finishes work effectively. Allow adequate drying time between coats and follow paint manufacturer instructions for best results.
- Light sand the white base coat before painting
- Use standard interior paint finishes
- Allow proper drying time between coats
- Follow paint manufacturer guidance