Fixing and buying guide
PREMDOR 6 PANEL MOULDED SMOOTH STANDARD CORE 686MM X 1981MM X 35MM
What this product is and who it is for
This is a pre-finished internal door blank suitable for residential and commercial fit-outs. The six-panel moulded design offers traditional aesthetics whilst the smooth faces ensure a professional finish when painted. It suits builders merchants customers who need quality doors for new builds, renovations, or speculative projects where on-site decoration is preferred or required.
- Internal door blank with traditional six-panel profile
- Moulded facings with smooth surfaces for painting
- White base coat applied at manufacture
- Standard core construction for reliable performance
Sizing and compatibility
This door measures 686mm wide by 1981mm tall by 35mm thick, making it a standard internal door size suitable for typical domestic and commercial doorways. The 35mm thickness is the industry standard for internal doors. Before purchase, confirm your opening dimensions and account for frame thickness and any threshold requirements. Check that your hinges and hardware are rated for this door weight and size.
- Width: 686mm
- Height: 1981mm
- Thickness: 35mm
- Verify opening size before ordering
Preparation and on-site finishing
The door arrives white base coated, which provides a primer layer for your chosen finish. Inspect the smooth moulded faces for any transport damage before installation. Light sanding may be required if any imperfections are present. The white base coat accepts paint, stain, or other finishes well. Allow adequate drying time between coats and follow paint manufacturer instructions for best results on the smooth surfaces.
- White base coat applied; ready for painting or staining
- Smooth faces ideal for high-quality paint finishes
- Inspect for damage upon delivery
- Light sanding may be needed before final finishing
Pre-installation checks
Before fitting, ensure the door is stored flat in a dry environment to prevent warping. Check that your frame is square and plumb, and that hinges and hardware are compatible with the 35mm thickness and door weight. Confirm the opening is exactly 686mm wide and 1981mm tall, allowing for frame and threshold clearances. Have all fixings and hanging hardware ready before installation begins.
- Store flat and dry before installation
- Verify frame is square and plumb
- Confirm opening dimensions match door size
- Prepare hinges and hardware in advance