Fixing and buying guide
PREMDOR 6 PANEL MOULDED SMOOTH STANDARD CORE 762MM X 1981MM X 35MM
What this door is and who it is for
This is a pre-finished internal door panel suitable for residential and light commercial applications. The six-panel moulded design offers traditional aesthetic appeal whilst the smooth face finish allows for easy painting on site. It is ideal for builders merchants customers, trade professionals, and experienced DIY installers who plan to paint the door to match their interior scheme.
- Six-panel moulded design with traditional appearance
- Smooth face finish for high-quality paint application
- White base coat applied at factory
- Standard core construction for reliable performance
- Suitable for interior use
Sizing and compatibility
This door is manufactured to standard UK internal door dimensions of 762mm width by 1981mm height by 35mm thickness. These measurements are typical for internal doorways in residential properties. Confirm your opening dimensions before purchase, allowing for frame thickness and fitting tolerances. The 35mm thickness is the standard depth for modern internal door frames.
- Width: 762mm
- Height: 1981mm
- Thickness: 35mm
- Standard UK internal door size
- Check your frame opening before ordering
Preparation and finishing
The door arrives with a white base coat applied, which provides a neutral foundation for your chosen finish. The smooth moulded faces are designed to accept paint readily without additional surface preparation beyond standard site practices. You should inspect the door for any transit damage and allow it to acclimatise to site conditions before hanging. Sand lightly if required and apply your chosen paint system according to manufacturer instructions.
- White base coat already applied
- Smooth faces ready for painting
- Allow acclimatisation time on site
- Light sanding may be required before final paint coat
- Use quality interior paint for best results
Pre-installation checks
Before fixing, verify that your door frame opening matches the stated dimensions and that the frame is square and level. Check that the door has not been damaged in transit and that all edges are intact. Ensure you have appropriate hanging hardware, hinges, and latch mechanisms ready. The door should be stored flat in dry conditions until installation to prevent warping.
- Measure frame opening carefully
- Check frame is square and level
- Inspect door for transit damage
- Store flat in dry conditions before hanging
- Gather hinges and hardware before starting installation