Fixing and buying guide

What this door is and who it suits

This is a pre-finished internal door with moulded panel facings rather than solid timber. The textured surface and white base coat allow you to paint it to your chosen colour on site, giving flexibility for different interior schemes. It suits new builds, refurbishments, and replacements where you need a traditional-looking internal door at a reasonable cost without the expense of solid timber alternatives.

Sizing and compatibility

At 762mm x 1981mm x 35mm, this door is sized for standard UK internal door frames. The 762mm width is a typical single-door leaf size. Check your existing frame opening dimensions before ordering to ensure a proper fit. The 35mm thickness is standard for internal doors and compatible with conventional hinges and latch hardware. If you need glazed options, PREMDOR offers complementary glazed versions of this door style.

• Width: 762mm (standard single door)
• Height: 1981mm (full height internal door)
• Thickness: 35mm (standard internal door)
• Check frame opening size before purchase

Preparation and finishing

The door arrives with a white base coat, which provides a clean foundation for on-site painting. The textured moulded faces are designed to accept paint well. Before installation, inspect the door for any transport damage and allow it to acclimatise to the room environment for 24 hours. Sand lightly if needed to key the surface, then apply your chosen finish using standard interior paint or primer and topcoat systems.

• White base coat pre-applied
• Textured faces ready for painting
• Allow 24-hour acclimatisation before hanging
• Light sanding recommended before final paint

Installation and hardware

This door requires standard internal door hardware: three hinges (typically 75mm or 100mm), a latch mechanism, and handle furniture. Ensure your frame is square and plumb before hanging. The 35mm thickness accommodates standard hinges and mortice locks. Pre-drill hinge positions carefully to avoid splitting the moulded faces. If you are uncertain about hanging techniques, consult a qualified fitter or refer to PREMDOR installation guidance.