How and where to use guide
PREMDOR 6 PANEL MOULDED TEXTURED STANDARD CORE 762MM X 1981MM X 35MM
Typical applications and installation
This door is designed for internal use in domestic properties and light commercial settings where a classic six-panel appearance is desired. It suits period properties, traditional interiors, and any scheme requiring a panelled door aesthetic. Install into prepared door frames using standard hanging techniques. The door dimensions of 762mm x 1981mm (width x height) fit standard UK doorway openings. Ensure the frame is square, level and plumb before hanging to guarantee smooth operation and proper clearance.
- Suitable for internal domestic and light commercial applications
- Fits standard UK doorway openings at 762mm x 1981mm
- Requires proper frame preparation and standard hanging techniques
- Allow adequate clearance for smooth swing and operation
On-site finishing and painting
The white base coat provides an ideal surface for on-site decoration. The textured moulded faces accept paint readily, allowing you to achieve a professional finish on site. Prepare surfaces by light sanding if required and apply undercoat followed by your chosen topcoat colour. The quality of the moulded faces ensures an even paint finish without additional filling or preparation in most cases.
- White base coat ready for painting or staining
- Textured moulded faces accept paint evenly
- Light surface preparation may be needed before decoration
- Suitable for both emulsion and gloss finishes
Maintenance and care
The standard core construction is durable for typical internal use. Maintain the door by keeping painted surfaces clean and touch up any scuffs or marks promptly to prevent moisture ingress. Avoid exposure to excessive moisture or direct water contact, as this can affect the core material. Regular inspection of hinges and hardware will ensure continued smooth operation.
- Keep painted surfaces clean and well maintained
- Protect from excessive moisture and water exposure
- Check hinges and hardware regularly for wear
- Touch up paint damage promptly to protect the core
Limitations and considerations
This is a standard core door suitable for internal use only and should not be exposed to external weather conditions. The 35mm core thickness is appropriate for internal applications but does not provide the thermal or acoustic performance of thicker or solid core doors. Glazed options are available separately if vision panels are required. Check that your frame opening matches the 762mm x 1981mm dimensions before ordering.
- Internal use only, not suitable for external exposure
- Standard core provides basic thermal and acoustic properties
- Glazed options available as separate products
- Verify frame opening dimensions match 762mm x 1981mm