Fixing and buying guide
PREMDOR 6 PANEL MOULDED TEXTURED STANDARD CORE 686MM X 1981MM X 35MM
What this door is and who it is for
This is a pre-finished internal door with a traditional six-panel moulded design. The textured facings provide visual depth and character, whilst the white base coat allows you to paint to your chosen colour. It is suitable for trade and serious DIY installers fitting internal doors in domestic properties. The door offers good value without compromising on appearance or build quality.
- Traditional six-panel moulded design
- White base coat ready for on-site painting
- Textured moulded facings for visual interest
- Suitable for internal use in domestic properties
- Affordable quality option for standard openings
Sizing and compatibility
This door measures 686mm wide by 1981mm tall by 35mm thick, making it suitable for standard UK domestic door openings. The 35mm thickness is the industry standard for internal doors. Before purchase, measure your existing door opening or frame to confirm compatibility. If your opening differs significantly from these dimensions, you may need a bespoke door or frame adjustment.
- Width: 686mm (27 inches)
- Height: 1981mm (78 inches)
- Thickness: 35mm (standard internal door)
- Fits typical UK domestic door frames
- Check your opening size before ordering
Finishing and preparation
The door arrives with a white base coat applied to the smooth faces, ready for painting. The textured moulded surfaces do not require additional preparation before painting. You can paint directly onto the white base coat using standard interior emulsion or eggshell finishes. Ensure the door is stored flat and in dry conditions before installation to prevent warping.
- White base coat applied to smooth faces
- Ready for on-site painting with interior finishes
- No sanding or priming required before painting
- Store flat and in dry conditions before hanging
- Allow paint to cure fully before closing door repeatedly
Pre-installation checks
Before hanging, inspect the door for any damage in transit and check that your frame is square, level and the correct size. Ensure hinges, handles and locks are to hand and compatible with a 35mm thick door. The door will require standard three-hinge hanging for a 1981mm height. Confirm that your opening has adequate clearance for the door swing and that any existing frame is in good condition.
- Inspect door for transit damage
- Verify frame is square and level
- Confirm frame opening matches 686mm x 1981mm
- Prepare hinges, handles and locks in advance
- Check door swing clearance in the room