How and where to use guide
PREMDOR 6 PANEL MOULDED TEXTURED FD30 FIRESHIELD 762MM X 1981MM X 44MM
Typical applications and installation
This FD30 fire-rated door is suitable for internal doorways in residential, commercial, and institutional buildings where Building Regulations require 30-minute fire resistance. Common applications include corridors, stairwells, plant rooms, and circulation spaces in multi-storey buildings. The door measures 762mm x 1981mm x 44mm, making it a standard single-leaf internal door size. Installation follows conventional methods: hang the door using three hinges into a fire-rated frame, ensuring the frame is properly fitted and sealed. The door must be hung plumb and square, with even gaps around all edges. Ensure the frame is securely fixed to the building structure and that any gaps between frame and wall are properly fire-stopped with appropriate sealant or intumescent strips as required by Building Regulations.
- Suitable for corridors, stairwells, and circulation spaces requiring fire safety
- Standard 762mm width fits most internal doorways
- Requires fire-rated frame and proper installation to maintain FD30 rating
- Must be installed plumb and square with even edge gaps
- Frame gaps must be fire-stopped to maintain fire resistance performance
On-site finishing and painting
The door arrives with a white base coat applied to the smooth moulded faces, providing an ideal foundation for on-site decoration. This allows you to paint or stain the door to match your interior colour scheme and specification. The textured faces accept paint readily and provide good coverage. Prepare the surface by light sanding if required to remove any dust or minor imperfections, then apply your chosen finish using standard interior paint systems. The moulded panel design means you can paint the entire door as one colour or pick out the panels and mouldings in contrasting colours for a more traditional appearance. Allow adequate drying time between coats and ensure good ventilation during application.
- White base coat provides ready-to-paint surface
- Textured faces accept paint and stain finishes readily
- Light sanding recommended before final decoration
- Can be painted as single colour or with contrasting panel details
- Use standard interior paint systems and allow proper drying time
Fire safety and maintenance
The FD30 Fireshield rating means this door will resist fire for 30 minutes when properly installed in a fire-rated frame. To maintain this performance, the door must not be modified after installation—do not cut, drill, or alter the door leaf or frame in ways that compromise the fire rating. Keep the door in good condition and ensure it closes properly; any damage to the door or frame should be assessed for its impact on fire performance. The door should be inspected regularly to confirm hinges are secure, the door closes fully, and there are no gaps or damage that might affect fire resistance. Do not remove or damage any fire-stopping materials around the frame.
- FD30 rating valid only when installed in approved fire-rated frame
- Do not cut, drill, or modify the door after installation
- Inspect hinges and closing mechanism regularly
- Ensure fire-stopping around frame remains intact
- Report any damage to the door or frame to site management
Limitations and on-site handling
This is an internal door only and must not be used in external applications or exposed to weather. The door should be stored flat or hung vertically in a dry environment on site to prevent warping or moisture damage before installation. Handle the door carefully during delivery and installation to avoid damage to the moulded faces or edges. The door is designed for standard internal use; it is not suitable for high-traffic commercial applications such as main entrance doors or areas subject to heavy impact. Glazed options are available if you require vision panels or additional light transmission through the door—consult your supplier for these alternatives.
- Internal use only—not suitable for external applications
- Store flat or vertically in dry conditions before hanging
- Handle carefully to protect moulded faces and edges
- Not recommended for high-impact or heavy-traffic locations
- Glazed options available if vision panels are required