Fixing and buying guide

What this door is and who it is for

This is an FD30 fire-rated internal door, meaning it provides 30 minutes of fire resistance when properly installed. The moulded panel design gives a traditional appearance whilst the textured finish and white base coat allow you to paint it to your chosen colour on-site. It suits new build projects, refurbishment work, and commercial installations where fire safety compliance and aesthetic flexibility are required.

Sizing and compatibility

The door measures 610mm wide by 1981mm tall by 44mm thick. This is a standard UK internal door size suitable for typical domestic and commercial door openings. Confirm your frame opening dimensions before ordering to ensure correct fit. The 44mm thickness is standard for internal doors and compatible with conventional door frames and hardware.

• Width: 610mm
• Height: 1981mm
• Thickness: 44mm
• Check your frame opening is compatible before purchase

Finish and on-site preparation

The door arrives with a white base coat applied to the smooth faces, ready for on-site painting. The textured moulded surfaces provide visual interest and are designed to accept paint finishes. Sand lightly if required before applying your chosen topcoat. Ensure the door is stored flat and protected from moisture and direct sunlight before installation.

• White base coat applied — ready for painting
• Textured moulded panel faces for traditional appearance
• Smooth surfaces suitable for high-quality finishing
• Store flat and protected until installation

Fire safety and installation

This door is FD30 rated and must be installed correctly to maintain its fire safety performance. Use appropriate fire-rated hinges, locks, and seals as specified for FD30 doors. Ensure the door frame and surrounding construction meet fire safety requirements. Do not drill or cut the door in ways that compromise its integrity. Consult building control or your specification if unsure about installation requirements.