How and where to use guide
PREMDOR 6 PANEL MOULDED TEXTURED FD30 FIRESHIELD 610MM X 1981MM X 44MM
Typical applications and installation
This FD30 fire-rated door is designed for internal use in buildings requiring fire safety compliance, including commercial offices, residential multi-storey buildings, care facilities, and institutional properties. The door measures 610mm wide by 1981mm high, making it suitable for standard UK doorway openings. Installation should follow building regulations and fire safety standards; the door must be hung using fire-rated hinges and fitted with appropriate fire-rated hardware and seals to maintain its FD30 rating. Ensure the door frame is also fire-rated and properly installed to preserve the integrity of the fire barrier. The door should be hung plumb and level, with consistent gaps around the perimeter to allow for proper operation and fire seal function.
- Suitable for internal doorways in commercial and residential buildings
- Requires fire-rated frame, hinges, and hardware to maintain FD30 certification
- Install with fire-rated seals around the frame perimeter
- Check local building regulations and fire safety requirements before installation
- Door must be hung plumb with even gaps all round
On-site finishing and painting
The door arrives with a white base coat and textured moulded faces, providing an excellent foundation for on-site decoration. The smooth faces are specifically designed to accept paint finishes, allowing you to match the door to your interior colour scheme and design requirements. Before painting, inspect the door for any transport damage and allow it to acclimatise to site conditions for 48 hours. Lightly sand the white base coat with fine-grit sandpaper to improve paint adhesion, then apply a quality primer suitable for moulded timber products. Two coats of interior paint will typically provide a professional finish. Avoid heavy sanding that may damage the textured moulded detail.
- Allow door to acclimatise to site conditions for 48 hours before finishing
- Lightly sand white base coat with fine-grit paper for better paint adhesion
- Apply primer suitable for moulded timber surfaces
- Apply two coats of quality interior paint for best results
- Protect moulded detail during sanding and painting
Fire rating and safety compliance
The FD30 designation indicates this door provides 30 minutes of fire resistance when properly installed and maintained. This rating is critical for compartmentalisation and life safety in buildings subject to building regulations. The door's 44mm thickness and moulded construction contribute to its fire performance, but the rating is only valid when the door is installed with fire-rated components throughout, including the frame, hinges, locks, and intumescent seals. Regular inspection and maintenance of these components is essential to preserve the fire rating. Do not modify the door by cutting, drilling, or removing components, as this will compromise its fire performance.
- FD30 rating valid only with complete fire-rated installation
- Use fire-rated hinges, locks, and intumescent seals
- Do not cut, drill, or modify the door structure
- Inspect seals and hardware regularly for damage or deterioration
- Replace damaged components with fire-rated equivalents
Maintenance and care
The moulded textured faces and white base coat require minimal maintenance under normal use. Wipe down with a damp cloth and mild detergent to remove dust and marks; avoid abrasive cleaners that may damage the finish. Check fire-rated seals and hardware annually, particularly in high-traffic areas, and replace any damaged intumescent seals immediately to maintain fire rating. The painted finish should be inspected periodically for chips or wear; touch up with matching paint as needed to protect the underlying surface and maintain appearance. Keep the door and frame free from obstructions and ensure it closes fully and smoothly.
- Clean with damp cloth and mild detergent only
- Avoid abrasive or harsh chemical cleaners
- Inspect fire seals and hardware annually
- Replace damaged intumescent seals promptly
- Touch up paint damage to prevent moisture ingress